N64>MIDI Customization Form

This is how I will contact you if I have any questions about your customizations, so make sure it's an active one!
Button Color for Mode Switch Button. Default is Black
LED Color for Drum Mode. Default is Green
LED Color for Synth Mode. Default is Blue
MIDI Channel for Drum Mode via USB 1-16 (default 10)
MIDI Channel for Drum Mode via Traditional 5pin connection 1-16 (default 10)
MIDI Channel for Synth Mode via USB 1-16 (default 1)
MIDI Channel for Synth Mode via Traditional 5pin connection 1-16 (default 1)
MIDI Channel for Pitch Bend Messages in Synth Mode via USB 1-16 (default 1)
MIDI Channel for Pitch Bend Messages in Synth Mode via Traditional 5pin connection 1-16 (default 1)
Number value of the MIDI CC to control with the Joystick Right/Left 1-127 (default 1, Modulation)
This value determines if the CC controlled in drum mode starts with the Minimum Value and always goes up to the Maximum Value (Yes) or if the CC starts in-between Minimum Value and Maximum Value and goes down when pushed left, up when pushed right. Typically if your selected CC defaults to 1 (such as Modulation) select Yes; if your selected CC defaults to 64 (such as Balance or Pan) select No. (Default is Yes)
The lowest possible value to be sent for for the selected CC 1-127 (default 1)
The highest possible value to be sent for the selected CC 1-127 (default 127)
MIDI Channel the Drum Mode CC values are sent on via USB 1-16 (default 10)
MIDI Channel the Drum Mode CC values are sent on via Traditional 5pin connection 1-16 (default 10)
This value sets the lowest possible velocity for notes. The neutral position of the joystick will send the midpoint value between this Floor and 127 as the default velocity. Setting this value to 1 makes the joystick extremely sensitive, but gives the full possible range of velocities. Raising this value gives more refined control, but reduces how softly notes can be played. Default of 25 gives a sensitive but manageable control. 1-127 (default 25)
The Pitch Bend range determines the range of control and sensitivity of the pitch bend control. Note that this control is relative to the range of the pitch bend wheel, not to a specific note range (that will be determined by the synth). By default the range is 4096-12288, giving half the range of the pitch bend wheel as the joystick range is very short. This means that if the pitch bend range on the synth is set to 1 octave, the control will have a range of 1/2 octave; if the synth has a range of 1 semitone, the control will have a range of 1/2 semitone. Setting this range to 1-16383 will give you the full range of the pitch bend wheel if you prefer to have full control, but this will make the PB very sensitive by default (but can be managed via your synth settings). 1-16383 (default 4096)
See range description above. 1-16383 (default 12288)
Number of octaves down from Middle C allowed. A higher number means a wider range, but easier to get "lost" as there is no visual indicator of octave. The default of 2 up and 2 down provides a total range of 5 octaves, similar to a 61 key keyboard. 1-5 (default 2)
Number of octaves up from Middle C allowed. A higher number means a wider range, but easier to get "lost" as there is no visual indicator of octave. The default of 2 up and 2 down provides a total range of 5 octaves, similar to a 61 key keyboard. 1-5 (default 2)
MIDI Note Number to be triggered when the A button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 40)
MIDI Note Number to be triggered when the B button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 38)
MIDI Note Number to be triggered when the L button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 35)
MIDI Note Number to be triggered when the R button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 42)
MIDI Note Number to be triggered when the Z button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 36)
MIDI Note Number to be triggered when the Start button is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 52)
MIDI Note Number to be triggered when D-Up is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 56)
MIDI Note Number to be triggered when D-Up+R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 50)
MIDI Note Number to be triggered when D-R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 48)
MIDI Note Number to be triggered when D-Down+R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 47)
MIDI Note Number to be triggered when D-Down is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 45)
MIDI Note Number to be triggered when D-Down+L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 43)
MIDI Note Number to be triggered when D-L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 41)
MIDI Note Number to be triggered when D-Up+L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 54)
MIDI Note Number to be triggered when C-Up is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 44)
MIDI Note Number to be triggered when C-Up+R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 51)
MIDI Note Number to be triggered when C-R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 46)
MIDI Note Number to be triggered when C-Down+R is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 55)
MIDI Note Number to be triggered when C-Down is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 39)
MIDI Note Number to be triggered when C-Down+L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 53)
MIDI Note Number to be triggered when C-L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 37)
MIDI Note Number to be triggered when C-Up+L is pressed. Default values use the General MIDI Drum Standard, I highly recommend using this standard when customizing your layout. (Default 49)
MIDI Note Number to be triggered when the A button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 69)
MIDI Note Number to be triggered when the B button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 71)
MIDI Note Number to be triggered when the L button is pressed. This control is a Drum Trigger and will send this note on the configured Drum channels. I highly recommend using the General MIDI Drum Standard when customizing this value. (Default 42)
MIDI Note Number to be triggered when the R button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 65)
MIDI Note Number to be triggered when the C-Down button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 60)
MIDI Note Number to be triggered when the C-L button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 62)
MIDI Note Number to be triggered when the C-Up button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 64)
MIDI Note Number to be triggered when the C-R button is pressed. Holding Z while pressing this button will trigger one note number down. Octave controls will increase/decrease this value by 12 for each octave up/down. (Default 67)
MIDI Note Number to be triggered when D-R is pressed. This control is a Drum Trigger and will send this note on the configured Drum channels. I highly recommend using the General MIDI Drum Standard when customizing this value. (Default 38)
MIDI Note Number to be triggered when D-L is pressed. This control is a Drum Trigger and will send this note on the configured Drum channels. I highly recommend using the General MIDI Drum Standard when customizing this value. (Default 36)
If there are any further customizations you would like, please describe what you want here and I will contact you to let you know if it is possible. Custom requests are handled on a case-by-case basis, but please note there may be additional fees for bespoke programming to be determined on a case-by-case basis. Feel free to contact me prior to ordering with questions about a bespoke request.
Put your order number here for validation.
This should be a short number included in your confirmation email from Peter Cat Productions (not a PayPal transaction ID).
This order number must correspond to a purchase of the Customized version of this device.
If this isn't correct I will reach out to you, but this will likely delay your order, so please double check this before you Submit!

Shopping cart

0

No products in the cart.